(0 items)
 
 
 
Home»Guides»Attachment Guide
 
GuidesDesign GuidesAttachment GuideCode Approval GuidesApplication GuidesSample WarrantiesMaintenance and RepairProduct Selection Guide
The Firestone Roofing Systems Attachment Guide is provided below. Hold your cursor over the file name to view when a file was last updated. To download the file, right-click on the file name and select "save target as." 

The guide is available as a PDF file and accessible through Adobe Acrobat. Visit the Adobe Acrobat Reader website if you would like to download the free software.
Attachment Guide (990.2Kb)

Listed below are the Firestone Mechnically Attached System layouts approved for Firestone minimum requirements only and may not necessarily meet Factory Mutual Codes.  For Factory Mutual Mechanically Attached System please visit the Code Approval Guides page.
Select All:
UltraPly TPO Mechnically Attached System (MAS) Layouts
The following Layouts are for Firestone minimum requirements for warranty.
Firestone UltraPly TPO 8' sheet with one perimeter sheet attached 12"oc. Use this drawing for up to a 60' building height.
UT-96-1-12 (64.7Kb)
Firestone UltraPly TPO 8' sheet with one perimeter sheet attached 6"oc. Use this drawing for up to a 60' building height.
UT 96 1 06.pdf (33.9Kb)
Firestone UltraPly TPO 8' sheet with two perimeter sheets attached 12"oc. Use this drawing for a 60' to a 120' building height.
UT-96-2-12 (67.5Kb)
Firestone UltraPly TPO 8' sheet with two perimeter sheets attached 6"oc. Use this drawing for a 60' to a 120' building height.
UT 96 2 06.pdf (35.5Kb)
Firestone UltraPly TPO 10' sheet with two perimeter sheets attached 12"oc. Use this drawing for up to a 60' building height.
UT-120-2-12 (61.2Kb)

Firestone UltraPly TPO 10' sheet with two perimeter sheets attached 6"oc. Use this drawing for up to a 60' building height.

UT 120 2 06.pdf (34.7Kb)
Firestone UltraPly TPO 10' sheet with four perimeter sheets attached 12"oc. Use this drawing for a 60' to 120' building height.
UT-120-4-12 (70.8Kb)

Firestone UltraPly TPO 10' sheet with four perimeter sheets attached 6"oc. Use this drawing for a 60' to a 120' building height.

UT 120 4 06.pdf (74.4Kb)
Firestone UltraPly TPO 12' sheet with two perimeter sheets attached 12"oc. Use this drawing for up to a 60' building height.
UT-148-2-12 (120.7Kb)

Firestone UltraPly TPO 12' sheet with two perimeter sheets attached 6"oc. Use this drawing for up to a 60' building height.

UT 148 2 06.pdf (103.7Kb)
Firestone UltraPly TPO 12' sheet with four perimeter sheets attached 12"oc. Use this drawing for a 60' to 120' building height.
UT-148-4-12 (130Kb)

Firestone UltraPly TPO 12' sheet with four perimeter sheets attached 6"oc. Use this drawing for a 60' to a 120' building height.

UT 148 4 06.pdf (116Kb)
RubberGard EPDM (Standard, LSFR, FR) Batten in the Seam (BITS) Layouts
The following layouts are for Firestone minimum requirements for warranty.
Firestone BITS system with 7 1/2' panel width for use with up to 60' building heights.
B-7-2-12 (57.3Kb)
Firestone BITS system with 7 1/2' panel width for use with 60' to 120' building heights.
B-7-4-12 (57.9Kb)
Firestone BITS system with 9' panel width for use with up to a 40' building height.
B-9-2-12 (56.9Kb)
Firestone BITS system with 9' panel width for use with 40' to 80' building heights.
B-9-4-12 (58.3Kb)
Firestone BITS system with 10' panel width for use with up to a 20' building height.
B-10-2-12 (57.1Kb)
Firestone BITS system with 10' panel width for use with 20' to 40' building heights.
B-10-4-12 (57.7Kb)
RubberGard EPDM (Standard, LSFR, FR) Mechanically Attached Systems (MAS) Layouts
Firestone MAS system for use with up to a 60' building height.
M-7-2-12 (41.8Kb)
Firestone MAS system for use with a 60' to 120' building height.
M-7-4-12 (41.9Kb)
Firestone MAS system for use with up to a 40' building height.
M-9-2-12 (41.5Kb)
Firestone MAS system for use with a 40' to 80' building height.
M-9-4-12 (41.9Kb)
Firestone MAS system for use with up to a 20' building height.
M-10-2-12 (41.4Kb)
Firestone MAS system for use with a 20' to 40' building height.
M-10-4-12 (41.8Kb)
RubberGard EPDM (Standard, LSFR, FR) Reinforced Mechnically Attached System (RMAS) Layouts
Firestone RMAS system with 7 1/2' panel width for use with up to a 60' building height.
R-7-2-12 (57.5Kb)
Firestone RMAS system with 7 1/2' panel width for use with a 60' to 120' building height.
R-7-4-12 (58.3Kb)
Firestone RMAS system with 10' panel width for use with up to a 40' building height.
R-10-2-12 (57.4Kb)
Firestone RMAS system with 10' panel width for use with a 40' to 80' building height.
R-10-4-12 (57.9Kb)
RubberGard EPDM (Standard, LSFR, FR) RMA System Layouts
Firestone RMA system with 7' RMA spacing for use with up to 60' building heights.
RMA-7-2-12 (96.2Kb)
Firestone RMA system with 7' RMA spacing for use with 60' to 120' building heights.
RMA-7-4-12 (99.8Kb)
Firestone RMA system with 8' RMA spacing for use with up to a 40' building height.
RMA-8-2-12 (96Kb)
Firestone RMA system with 8' RMA spacing for use with 40' to 80' building heights.
RMA-8-4-12 (99.6Kb)
Firestone RMA system with 10' RMA spacing for use with up to a 20' building height.
RMA-10-2-12 (91.9Kb)
Firestone RMA system with 10' RMA spacing for use with 20' to 40' building heights.
RMA-10-4-12 (97.1Kb)
Firestone RMA system with 7' RMA spacingfor use with up to 60' building heights.
RMA-7-2-12 (98.7Kb)
Firestone RMA system with 7' RMA spacing for use with 60' to 120' building heights.
RMA-7-4-12 (107Kb)
Firestone RMA system with 8' RMA spacing for use with up to a 40' building height.
RMA-8-2-12 (98.5Kb)
Firestone RMA system with 8' RMA spacing for use with 40' to 80' building heights.
RMA-8-4-12 (106.8Kb)
Firestone RMA system with 10' RMA spacing for use with up to a 20' building height.
RMA-10-2-12 (93Kb)
Firestone RMA system with 10' RMA spacing for use with 20' to 40' building heights.
RMA-10-4-12 (100.8Kb)
 
Home | Legal Notice and Privacy Policy | Site Map | Contact Us Global Portal | Copyright ©2013, Firestone Building Products